PDR Car Dent Repair Tool Auto Body Part Hail Dent Removal Kits Metal Slide Hammer Suction Cup Puller Kit Dent Accessories
PDR Car Dent Repair Tool Auto Body Part Hail Dent Removal Kits Metal Slide Hammer Suction Cup Puller Kit Dent Accessories
SPECIFICATIONS
Brand Name: SUPER PDR
Hign-concerned Chemical: None
Origin: Mainland China
Model Number: MPT-TK0391EU
Function 2: Rubber Hammer, LED Lamp Line Board
Type: Hand Tools Set, Combination
Function 1: induction heater car dent repair paintless
Item1: Dent Removal Tools
Function: Dent PullersPaintless Dent Repair Kit Tools Auto
Function 3: Glue Tabs For Panitless Dent Repair Tool Auto
Function 5: Car Body Dent Damage Repair Tools
Item2: Paintless Dent Repair
Item: Tools Kit For Car
Function 4: Hot Adhesive Glue Sticks For Hot Melt Glue Gun
Description:
This Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.
The tension puller works well with a tap down hammer when pulling large dents.
It's very easy to control, everyone can removal the dent easily by yourself.
Features:
1. Slide hammer is more powerful for dent repair, conquer big dent.
2. The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent.
3. Big dent needs slide hammer or puller; small dent needs mini dent lifter or pulling bridge.
4. Different tabs for different dent lifter or the Slide hammer, works with all glue pullers.
5. Use a slide hammer or dent lifter or any pulling tools lift the dent, try many times.
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Kit 1 "Golden"
1 * Rubber Hammer
1 * 40w White Hot Melt Glue Gun with Cigarette Lighter charger
20 * Hot Melt Glue Sticks(Black/Yellow)
1 * LED Black Lined Board
1 * 2in1 T Slide Hammer
2 * Yellow Dent Puller
1 * Golden All-Metal Dent Lifter
1 * Silver Dent Pulling Bridge
1 * Metal Tap Down Pen with 9Pcs replaceable heads
5 * Black Dent Glue Tabs for Pulling Bridge
1 * Hot wind Shovel
27 * Black Dent Glue Tabs
1 * Black Square Pump Wedge
1 * Empty Spary Bottle
1 * Rubber Shovel
1 * Duster Cloth
1 * Super PDR user Instruction
1 * Tool Bag
Kit 2 " Black"
Black Nylon Dent Lifter
Silver Dent Bridge Lifter
2 IN 1 T-bar Slider Hammer